|
MB Quart - Discus Series 6"x9" 2-Way Coaxial Set- DKE 169 (MBQDKE169): By upgrading your existing OEM or aftermarket speakers with these high quality, entry-level replacement components, you can expect drastically improved sound quality in your automotive listening environment. Many BMW's require the useof adapter plates to easily install your new speakers. When necessary, wewill include, at no charge, BSW adapter platesbased on your vehicle, a $30 - $80 value!
COAXIAL TWEETER COOLING ELEMENTA unique feature of the Discus 13 mm coaxial tweeters is their integrated cooling element. A technique derived from our BTT technology, the cooling element pulls heat from the magnet and voice coil assembly to extend operation and improve power handling. METAL TWEETER HOUSING (COMPONENT)Our new Discus 13 mm tweeter uses a metal tweeter housing. It is a direct application of our BTT technology originally applied to our Q Line tweeters. This new design encapsulates the neodymium magnet structure in a specially designed metal cooling housing. This new mechanical structure helps to remove the excess energy generated inside the tweeters magnet and voice coil assembly. By dissipating the unwanted heat into the surrounding environment, our new Discus tweeter offers exceptional performance, improved power handling and high reliability. The extremely small dimensions of our new 13 mm tweeter allow it to be installed in virtually any application. TITANIUM DOMETitanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Our new, smaller 13 mm Discus tweeter domes provide a smooth frequency response and extended bandwidth in a very small package. This is what gives MB QUART its signature sound. COMPOSITE BASKETThe new Discus baskets use a combination of polyamide ABS composite reinforced with extremely short glass fibers to form the basket. Similar to our Premium and Reference Line baskets, our new design will withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is attached via a metal flange (another application of our BTT technology) that acts both as a cooling element and as a protective covering to seal out dirt, humidity and temperature fluctuations. Because the basket is non-metallic, non-magnetic and resonance- free, it becomes one of the most ideal designs for automotive loudspeaker application. POLYPROPYLENE CONESThe cones of the bass and mid-range drivers are made of a special mineral-based polypropylene. This material is far superior to a conventional paper cone. This applies to both its acoustical properties and its resistance to humidity, temperature fluctuations and UV radiation. The result is pure listening pleasure, year after year. TWEETER PROTECTIONA PTC protective element is incorporated into the loudspeaker crossover to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy and ensures the sound quality of the tweeter even at extreme sound levels.
|
Not Sure what speakers fit your BMW? Check the Fitment Guide!Get the improvement you demand, at a very attractive price point. By upgrading your existing OEM or aftermarket speakers with these high quality, entry-level replacement components, you can expect drastically improved sound quality in your automotive listening environment. COAXIAL TWEETER COOLING ELEMENTA unique feature of the Discus 13 mm coaxial tweeters is their integrated cooling element. A technique derived from our BTT technology, the cooling element pulls heat from the magnet and voice coil assembly to extend operation and improve power handling. METAL TWEETER HOUSING (COMPONENT)Our new Discus 13 mm tweeter uses a metal tweeter housing. It is a direct application of our BTT technology originally applied to our Q Line tweeters. This new design encapsulates the neodymium magnet structure in a specially designed metal cooling housing. This new mechanical structure helps to remove the excess energy generated inside the tweeters magnet and voice coil assembly. By dissipating the unwanted heat into the surrounding environment, our new Discus tweeter offers exceptional performance, improved power handling and high reliability. The extremely small dimensions of our new 13 mm tweeter allow it to be installed in virtually any application. TITANIUM DOMETitanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Our new, smaller 13 mm Discus tweeter domes provide a smooth frequency response and extended bandwidth in a very small package. This is what gives MB QUART its signature sound. COMPOSITE BASKETThe new Discus baskets use a combination of polyamide ABS composite reinforced with extremely short glass fibers to form the basket. Similar to our Premium and Reference Line baskets, our new design will withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is attached via a metal flange (another application of our BTT technology) that acts both as a cooling element and as a protective covering to seal out dirt, humidity and temperature fluctuations. Because the basket is non-metallic, non-magnetic and resonance- free, it becomes one of the most ideal designs for automotive loudspeaker application. POLYPROPYLENE CONESThe cones of the bass and mid-range drivers are made of a special mineral-based polypropylene. This material is far superior to a conventional paper cone. This applies to both its acoustical properties and its resistance to humidity, temperature fluctuations and UV radiation. The result is pure listening pleasure, year after year. TWEETER PROTECTIONA PTC protective element is incorporated into the loudspeaker crossover to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy and ensures the sound quality of the tweeter even at extreme sound levels.
|
|
Discover a stunningly bright and open high-end frequency range with this tweeter upgrade for E46 and E39 Sedans, among others. You'll hear details in your music you never heard before. METAL COAXIAL TWEETER SUPPORTThe new Premium coaxial tweeter support allows for rapid conversion of the component speaker elements into a coaxial system. Fashioned from zinc alloy, the metal coaxial tweeter support represents a new application of our BTT technology. When inserted into the center of the driver, it effectively reduces the excess energy produced within the voice coil assembly. This new tweeter support system also offers adjustable positioning of the tweeter. Three different angles, each 45 apart, allows for the tweeter to be positioned for the best acoustical reflection angle based upon your specific installation needs. METAL TWEETER HOUSINGOur Premium 25 mm tweeter housing represents a direct application of our BTT technology originally applied to our Q-Line tweeters. Every Premium tweeter is encapsulated within a specially designed metal cooling housing. Coupled to the tweeters motor assembly, the excess energy generated inside the tweeters magnet and voice coil assembly is dissipated into the surrounding environment providing exceptional performance, improved power handling and high reliability. The compact design allows the Premium tweeter to be used in applications where size is a consideration. WET POWDER COATING (WPC)MB QUART pioneered the use of the wet powder coating (WPC) in our Q-Line mobile loudspeakers. This technique was developed by the Atomic Research facility in Jlich, Germany. It is a deposition process that applies a thin coating of metal to another surface. In our application of this technology, extremely fine and absolutely pure titanium powder is applied to our polypropylene cones. This results in an increase to the cones strength-to-weight-ratio as well as in the reduction of unwanted out-of-bandwidth harmonics and acoustical distortion. TWEETER PROTECTIONA light bulb is incorporated into the Premium and Reference crossover networks to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy (lighting the bulb) and allows continuous operation of the tweeter even at extreme volumes. COMPOSITE BASKETUsing a combination of polyamide ABS composite reinforced with extremely short glass fibers, our Premium and Reference Line baskets withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is added through CONNECTION TERMINALSThe solid one-piece connection terminals provide all possible connection options. Whether plug-connected, screw-connected or soldered, even with heavy-duty twin-core leads, the connections stay secure, effectively cutting out transfer resistance of even large-section cables.
|
The obvious choice for our F.110E enclosure, the new Premium series 10" subwoofer has redefined what one can expect from a subwoofer in an automotive listening environment. Exacting response, powerful impact. You can truly feel every tone throughout your body. You have never heard a subwoofer that can reproduce low end frequencies to the extent that this woofer is capable of. It almost doesn't sound like a subwoofer at all. It sounds like you are in the recording studio yourself, listening to the music the way it was meant to be heard, and felt. Wipe that grin off of your face, and audition one for yourself.
10"PWE 252/254 DVC Subwoofer |
|
Impedance |
2x2 / 2x4 Ohms |
|
Frequency Response |
18 300 |
|
Sensitivity |
3,2dB |
|
Power Range |
400Watts |
|
Crossover Frequency |
- |
|
Recommended Box 1 (Vb) |
0.65 cu. ft. sealed |
|
Redefine the Sound in the Rear of Your E46 Cabrio or E36 . . .These 4" Premium Components are the perfect complement for the overall sound quality in your E36. We use these components in all of our project E36's for their ability to perform at high volumes while maintaining unbelievable accuracy and clarity. Proven reliability, proven performance. Are you ready? METAL COAXIAL TWEETER SUPPORTThe new Premium coaxial tweeter support allows for rapid conversion of the component speaker elements into a coaxial system. Fashioned from zinc alloy, the metal coaxial tweeter support represents a new application of our BTT technology. When inserted into the center of the driver, it effectively reduces the excess energy produced within the voice coil assembly. This new tweeter support system also offers adjustable positioning of the tweeter. Three different angles, each 45 apart, allows for the tweeter to be positioned for the best acoustical reflection angle based upon your specific installation needs. METAL TWEETER HOUSINGOur Premium 25 mm tweeter housing represents a direct application of our BTT technology originally applied to our Q-Line tweeters. Every Premium tweeter is encapsulated within a specially designed metal cooling housing. Coupled to the tweeters motor assembly, the excess energy generated inside the tweeters magnet and voice coil assembly is dissipated into the surrounding environment providing exceptional performance, improved power handling and high reliability. The compact design allows the Premium tweeter to be used in applications where size is a consideration. WET POWDER COATING (WPC)MB QUART pioneered the use of the wet powder coating (WPC) in our Q-Line mobile loudspeakers. This technique was developed by the Atomic Research facility in Jlich, Germany. It is a deposition process that applies a thin coating of metal to another surface. In our application of this technology, extremely fine and absolutely pure titanium powder is applied to our polypropylene cones. TWEETER PROTECTIONA light bulb is incorporated into the Premium and Reference crossover networks to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy (lighting the bulb) and allows continuous operation of the tweeter even at extreme volumes. COMPOSITE BASKETUsing a combination of polyamide ABS composite reinforced with extremely short glass fibers, our Premium and Reference Line baskets withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is added through CONNECTION TERMINALSThe solid one-piece connection terminals provide all possible connection options. Whether plug-connected, screw-connected or soldered, even with heavy-duty twin-core leads, the connections stay secure, effectively cutting out transfer resistance of even large-section cables. |
|
Not Sure what speakers fit your BMW? Check the Fitment Guide! |
Our most popular audiophile component system upgrade, the Premium series components will change the way you listen to music in your BMW. Envelope yourself with awe-inspiring realism and detail previously inaudible in a vehicle. Brilliant high frequency definition. A soundstage so wide it extends past the doors and dashboard, making you feel as if you were at a concert, not confined in the cockpit of your BMW.
Want to get loud? Not a problem. Handling 200 watts of power effortlessly, these components can be heard loud and clear at 80mph, even over your intake and exhaust notes.
The MB Quart PCE213 5.25"component system has redefined the industry standard for not only sound quality and performance, but reliability as well. These are the components of choice for several of our project cars, and after over a year of constant use, we have not experienced a single issue with them. Bavarian Soundwerks selects only the finest for your BMW, and these components are a true reflection of that very principle.
Premium Components REQUIRE the use of an aftermarket amplifier.
The new Premium coaxial tweeter support allows for rapid conversion of the component speaker elements into a coaxial system. Fashioned from zinc alloy, the metal coaxial tweeter support represents a new application of our BTT technology. When inserted into the center of the driver, it effectively reduces the excess energy produced within the voice coil assembly. This new tweeter support system also offers adjustable positioning of the tweeter. Three different angles, each 45 apart, allows for the tweeter to be positioned for the best acoustical reflection angle based upon your specific installation needs.
Our Premium 25 mm tweeter housing represents a direct application of our BTT technology originally applied to our Q-Line tweeters. Every Premium tweeter is encapsulated within a specially designed metal cooling housing. Coupled to the tweeters motor assembly, the excess energy generated inside the tweeters magnet and voice coil assembly is dissipated into the surrounding environment providing exceptional performance, improved power handling and high reliability. The compact design allows the Premium tweeter to be used in applications where size is a consideration.
MB QUART pioneered the use of the wet powder coating (WPC) in our Q-Line mobile loudspeakers. This technique was developed by the Atomic Research facility in Jlich, Germany. It is a deposition process that applies a thin coating of metal to another surface. In our application of this technology, extremely fine and absolutely pure titanium powder is applied to our polypropylene cones. This results in an increase to the cones strength-to-weight-ratio as well as in the reduction of unwanted out-of-bandwidth harmonics and acoustical distortion.
A light bulb is incorporated into the Premium and Reference crossover networks to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy (lighting the bulb) and allows continuous operation of the tweeter even at extreme volumes.
Using a combination of polyamide ABS composite reinforced with extremely short glass fibers, our Premium and Reference Line baskets withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is added through
The solid one-piece connection terminals provide all possible connection options. Whether plug-connected, screw-connected or soldered, even with heavy-duty twin-core leads, the connections stay secure, effectively cutting out transfer resistance of even large-section cables.
5.25" 2-way component / coaxial system with 1" tweeter |
|
Impedance |
4 Ohms |
|
Frequency Response |
52 32.000 |
|
Sensitivity |
2,6dB |
|
Power Range |
40 100Watts |
|
Crossover Frequency |
2.500Hz |
Q-Line Technologies, Performance You Can Hear. . .By incorporating several of the Q-Line features into the Premium Series components, MB Quart has brought sound quality previously thought unattainable at this price point to the rest of us. The Premium Series provides some of the most realistic, natural sounding images imaginable to your BMW. Take your listening experience to a whole new level. You will not find a better sounding, higher quality speaker available for your BMW that doesn't break the bank. METAL COAXIAL TWEETER SUPPORTThe new Premium coaxial tweeter support allows for rapid conversion of the component speaker elements into a coaxial system. Fashioned from zinc alloy, the metal coaxial tweeter support represents a new application of our BTT technology. When inserted into the center of the driver, it effectively reduces the excess energy produced within the voice coil assembly. This new tweeter support system also offers adjustable positioning of the tweeter. Three different angles, each 45 apart, allows for the tweeter to be positioned for the best acoustical reflection angle based upon your specific installation needs. METAL TWEETER HOUSINGOur Premium 25 mm tweeter housing represents a direct application of our BTT technology originally applied to our Q-Line tweeters. Every Premium tweeter is encapsulated within a specially designed metal cooling housing. Coupled to the tweeters motor assembly, the excess energy generated inside the tweeters magnet and voice coil assembly is dissipated into the surrounding environment providing exceptional performance, improved power handling and high reliability. The compact design allows the Premium tweeter to be used in applications where size is a consideration. WET POWDER COATING (WPC)MB QUART pioneered the use of the wet powder coating (WPC) in our Q-Line mobile loudspeakers. This technique was developed by the Atomic Research facility in Jlich, Germany. It is a deposition process that applies a thin coating of metal to another surface. In our application of this technology, extremely fine and absolutely pure titanium powder is applied to our polypropylene cones. This results in an increase to the cones strength-to-weight-ratio as well as in the reduction of unwanted out-of-bandwidth harmonics and acoustical distortion. TWEETER PROTECTIONA light bulb is incorporated into the Premium and Reference crossover networks to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy (lighting the bulb) and allows continuous operation of the tweeter even at extreme volumes. COMPOSITE BASKETUsing a combination of polyamide ABS composite reinforced with extremely short glass fibers, our Premium and Reference Line baskets withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is added through CONNECTION TERMINALSThe solid one-piece connection terminals provide all possible connection options. Whether plug-connected, screw-connected or soldered, even with heavy-duty twin-core leads, the connections stay secure, effectively cutting out transfer resistance of even large-section cables.
|
|
Your BMW Deserves the Very Best. . .These loudspeakers have redefined the listening experience that one can expect from a vehicle. They are the ultimate expression from MB Quart. German Engineering at it's finest, the features found in these components are at the absolute forefront of automotive loudspeaker technology. These Components, Coupled with Your BMW, Will Truly Create the Ultimate Driving Machine. . .WET POWDER COATING (WPC)MB QUART pioneered the use of the Wet Powder Coating (WPC) process. Originally developed by the Atomic Research facility in Jlich, Germany, this deposition process applies a thin coating of metal to another surface. In our application of this technology, extremely fine and absolutely pure titanium powder is applied to our polypropylene cones. This results in an increase to the cones strength-to-weight-ratio as well as in the reduction of unwanted out-of-bandwidth harmonics and acoustical distortion. BALANCED TEMPERATURE TECHNOLOGY (BTT)Heat adversely affects the performance of electrical components. MB QUARTs Balanced Temperature TechnologyTM eliminates this condition through the application of unique heat dissipation techniques creating a constant and predictable temperature environment for all critical Q System components. BTT technology provides unrivaled sound quality and predictable, long-term performance. ALUMINUM TWEETER HOUSINGSOur Q-Line 25 mm aluminum tweeter housing represents a direct application of our BTT technology. Every Q tweeter is encapsulated within a specially designed aluminum cooling housing. Coupled to the tweeters motor assembly, the excess energy generated inside the tweeters magnet and voice coil assembly is dissipated into the surrounding environment, resulting in exceptional performance, improved power handling and high reliability. TITANIUM DOMETitanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Both our Q and Premium tweeter domes incorporate a composite surround material connecting the dome to the housing. This combination of dome materials reduces unwanted, out-of-bandwidth harmonics and acoustical distortion. The result is an extremely smooth frequency response and extended bandwidth for a truly musical listening experience. This is what gives MB QUART its signature sound. DIE-CAST ALUMINIUM BASKETSDesigned specifically for low-profile installations, these die-cast aluminum baskets are unique in that they can be installed in factory speaker locations. Lightweight but extremely rigid, the thin-wall casting technique provides structural integrity without undue stress on the mounting surface. The neodymium magnet is hydraulically pressed and permanent secured into the frame cavity. Generously sized integral cooling ribs for improved heat convection represent our original application of BTT technology. CONNECTION TERMINALSThe Q Line die-cast basket incorporates a gold-plated, multi-application input connection terminal system that provides a safe and secure electrical contact. Regardless of the wire conductor size, solder, screw-down or plug-in spade connections are possible.
|
WET POWDER COATING (WPC)MB QUART pioneered the use of the Wet Powder Coating (WPC) process. Originally developed by the Atomic Research facility in Jlich, Germany, this deposition process applies a thin coating of metal to another surface. In our application of this technology, extremely fine and absolutely pure titanium powder is applied to our polypropylene cones. This results in an increase to the cones strength-to-weight-ratio as well as in the reduction of unwanted out-of-bandwidth harmonics and acoustical distortion. BALANCED TEMPERATURE TECHNOLOGY (BTT)Heat adversely affects the performance of electrical components. MB QUARTs Balanced Temperature TechnologyTM eliminates this condition through the application of unique heat dissipation techniques creating a constant and predictable temperature environment for all critical Q System components. BTT technology provides unrivaled sound quality and predictable, long-term performance. ALUMINUM TWEETER HOUSINGSOur Q-Line 25 mm aluminum tweeter housing represents a direct application of our BTT technology. Every Q tweeter is encapsulated within a specially designed aluminum cooling housing. Coupled to the tweeters motor assembly, the excess energy generated inside the tweeters magnet and voice coil assembly is dissipated into the surrounding environment, resulting in exceptional performance, improved power handling and high reliability. TITANIUM DOMETitanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Both our Q and Premium tweeter domes incorporate a composite surround material connecting the dome to the housing. This combination of dome materials reduces unwanted, out-of-bandwidth harmonics and acoustical distortion. The result is an extremely smooth frequency response and extended bandwidth for a truly musical listening experience. This is what gives MB QUART its signature sound. DIE-CAST ALUMINIUM BASKETSDesigned specifically for low-profile installations, these die-cast aluminum baskets are unique in that they can be installed in factory speaker locations. Lightweight but extremely rigid, the thin-wall casting technique provides structural integrity without undue stress on the mounting surface. The neodymium magnet is hydraulically pressed and permanent secured into the frame cavity. Generously sized integral cooling ribs for improved heat convection represent our original application of BTT technology. CONNECTION TERMINALSThe Q Line die-cast basket incorporates a gold-plated, multi-application input connection terminal system that provides a safe and secure electrical contact. Regardless of the wire conductor size, solder, screw-down or plug-in spade connections are possible.
|
MB Quart's dedication to superb sound quality has strengthened their name for decades. Around the world MB Quart is known as THE name in mobile audio. The company whose engineering and artistry have consistently risen head and shoulders above the pack. So when you hear the best of the best - MB Quart's Q-Line - you know you are experiencing something truly great.
The most remarkable thing about these components is that they don' t sound like speakers at all. In fact you become totally unaware of the fact that you are anywhere but inside the music. Say goodbye to speakers that just play music at you, always sounding like the cheap plastic or paper they were made from, and step into the fully dynamic, distortion-free spectrum of sound as it was intended to be heard.
MB QUART pioneered the use of the Wet Powder Coating (WPC) process. Originally developed by the Atomic Research facility in Jlich, Germany, this deposition process applies a thin coating of metal to another surface. In our application of this technology, extremely fine and absolutely pure titanium powder is applied to our polypropylene cones. This results in an increase to the cones strength-to-weight-ratio as well as in the reduction of unwanted out-of-bandwidth harmonics and acoustical distortion.
Heat adversely affects the performance of electrical components. MB QUARTs Balanced Temperature TechnologyTM eliminates this condition through the application of unique heat dissipation techniques creating a constant and predictable temperature environment for all critical Q System components. BTT technology provides unrivaled sound quality and predictable, long-term performance.
Our Q-Line 25 mm aluminum tweeter housing represents a direct application of our BTT technology. Every Q tweeter is encapsulated within a specially designed aluminum cooling housing. Coupled to the tweeters motor assembly, the excess energy generated inside the tweeters magnet and voice coil assembly is dissipated into the surrounding environment, resulting in exceptional performance, improved power handling and high reliability.
Titanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Both our Q and Premium tweeter domes incorporate a composite surround material connecting the dome to the housing. This combination of dome materials reduces unwanted, out-of-bandwidth harmonics and acoustical distortion. The result is an extremely smooth frequency response and extended bandwidth for a truly musical listening experience. This is what gives MB QUART its signature sound.
Designed specifically for low-profile installations, these die-cast aluminum baskets are unique in that they can be installed in factory speaker locations. Lightweight but extremely rigid, the thin-wall casting technique provides structural integrity without undue stress on the mounting surface. The neodymium magnet is hydraulically pressed and permanent secured into the frame cavity. Generously sized integral cooling ribs for improved heat convection represent our original application of BTT technology.
The Q Line die-cast basket incorporates a gold-plated, multi-application input connection terminal system that provides a safe and secure electrical contact. Regardless of the wire conductor size, solder, screw-down or plug-in spade connections are possible.
5.25" 2-Way QSD Series Separate Components |
|
Impedance |
4 Ohms |
|
Frequency Response |
50-32k |
|
Sensitivity |
85 (3,2)dB |
|
Power Range |
70-150Watts |
|
Crossover Frequency |
2.400Hz |
When choosing the audio components that best suit your tastes, remember that a chain is only as strong as it's weakest link. For Q-line components to reproduce the subtlest nuances for which they were designed, they must have extraordinarily clean audio and amplification signals. In order to truly optimize the performance of your Q-Line speakers, we strongly recommend using a Q-Line Amplifier as your amplification source as well as wiring your new system with the appropriate monster cable kit. Please visit our Info Center or contact a representative for more information on how to fully integrate and optimize your audio system.
Capable of powering a Premium subwoofer to its maximum capabilities just as efficiently as it brings a pair Q-Line components to life, this amplifier is infinitely versatile. Two channels of unbelieveably pure, dynamic output give this amplifier sound quality characteristics previously thought unattainable in the mobile listening environment. MB Quart's ultimate expression, this amplifier redefines what one can expect from an in-car listening experience.
Coupled with Q-Line components, this combination rivals even the finest home and professional audio systems.
Your BMW deserves the absolute finest, and this is indeed it.
With the purchase of an MBQuart amplifier and Bavarian Soundwerks wiring kit, Bavarian Soundwerks will ensure that all the extra work has already been done for you. Our wiring kits come with fuse holders and terminals already installed for you. We'll even install the MBQuart wire terminals used for effortless connection from your power source and audio signal to your new amp. We have taken every measure to ensure that you or your professional installer is left with only the bare minimum labor required to integrate our system into your BMW.
Genuine MB QUART fans have long been waiting for this, and now they are here: the first MB QUART amplifiers are being launched onto the market, rounding off the MB QUART Car Audio System into the complete sound experience.
These new units are perfectly matched to the MB QUART loudspeaker systems, and are equipped with a range of special features that make them the best in their class. For example, the assemblies are arranged one above the other, and their power supply is insulated from the end stage. The analog operating elements are installed at the top, and combined with a digital display. All connections are located on the left side of the amplifier. And finally, a unique bypass mode ensures maximum amplifier performance and high loading. In combination with MB QUART loudspeakers, the result is an unbelievably different and truly amazing sound experience: simply perfection.
A proprietary circuit that simplifies the signal path of the amplifier, allowing the signal to travel through the amplifier at a low voltage. The result: Greater reliability, cleaner performance and exceptional musicality with the speed, durability and power of MOSFETs. (U.S. Patent 4,467,288)
MEHSA is a proprietary process that yields up to 5 times better heat transfer than traditional FET mounting techniques using the exact same components. A multiplayer insulated metal substrate operating with minimal thermal resistance spreads heat both downward & outward to quickly dissipate heat from each device across the heat sink.
MB Quart uses MOSFET devices in both the power supply and output stages of amplifiers. This means better: thermal stability, switching speed, ultra low output impedance and wider bandwidth linearity. MOSFETs operate very similarly to vacuum tubes in that they are more linear than bi-polar transistors. However, MOSFETs can deliver the midrange clarity without the limitations of transient response and high frequency phase shifting normally associated with tube operation. Bottom line, MBQuart uses the best components so you will too!
|
|
 ALL MB QUART amplifiers are designed, developed, manufactured and tested in accordance with the CEA-2006 Amplifier Power Standard. CEA-2006 specification. |
|
Power Output |
500 Watts RMS x 2 channels at 4 and 2-Ohms and < 1.0% THD+N |
|
Signal-to-Noise |
>73 dBA (1 Watt @ 4-Ohms) |
|
Input Signal |
200 mV - 20V |
|
Dimensions |
30 cm x 39 cm x 9,5 cm |
|
Weight |
9 kg |
|
Dissipation Technology |
Dual Fan-cooled Extruded Aluminum Heatsinks |
With the purchase of an MBQuart amplifier and Bavarian Soundwerks wiring kit, we'll ensure that all the extra work has already been done for you. Our wiring kits come with fuse holders and terminalsalready installed for you. We'll even install the MBQuart wire terminals used for effortless connection from yourpower source and audio signal to your new amp. We have taken every measure to ensure that you or your professional installer is left with only the bare minimum labor required to integrate our system into your BMW.
Genuine MB QUART fans have long been waiting for this, and now they are here: the first MB QUART amplifiers are being launched onto the market, rounding off the MB QUART Car Audio System into the complete sound experience.
These new units are perfectly matched to the MB QUART loudspeaker systems, and are equipped with a range of special features that make them the best in their class. For example, the assemblies are arranged one above the other, and their power supply is insulated from the end stage. The analog operating elements are installed at the top, and combined with a digital display. All connections are located on the left side of the amplifier. And finally, a unique bypass mode ensures maximum amplifier performance and high loading. In combination with MB QUART loudspeakers, the result is an unbelievably different and truly amazing sound experience: simply perfection.
A proprietary circuit that simplifies the signal path of the amplifier, allowing the signal to travel through the amplifier at a low voltage. The result: Greater reliability, cleaner performance and exceptional musicality with the speed, durability and power of MOSFETs. (U.S. Patent 4,467,288)
MEHSA is a proprietary process that yields up to 5 times better heat transfer than traditional FET mounting techniques using the exact same components. A multiplayer insulated metal substrate operating with minimal thermal resistance spreads heat both downward & outward to quickly dissipate heat from each device across the heat sink.
MB Quart uses MOSFET devices in both the power supply and output stages of amplifiers. This means better: thermal stability, switching speed, ultra low output impedance and wider bandwidth linearity. MOSFETs operate very similarly to vacuum tubes in that they are more linear than bi-polar transistors. However, MOSFETs can deliver the midrange clarity without the limitations of transient response and high frequency phase shifting normally associated with tube operation. Bottom line,MBQuart uses the best components so you will too!
Full-Range Mono Amplifier |
ALL MB QUART amplifiers are designed, developed, manufactured and tested in accordance with the CEA-2006 Amplifier Power Standard. CEA-2006 specification. |
|
Power Output |
1000 Watts RMS x 1 channel at 4 and 2-Ohms and < 1.0% THD+N |
|
Signal-to-Noise |
>70 dBA (1 Watt @ 4-Ohms) |
|
Input Signal |
200 mV - 20V |
|
Dimensions |
30 cm x 39 cm x 9,5 cm |
|
Weight |
9 kg |
|
Dissipation Technology |
Dual Fan-cooled Extruded Aluminum Heatsinks |
Always the FinestIf there exists a tweeter this clean and accurate, a crossover mate whose circuitry is so beautifully designed, please let us know. As with all Q-Line components, rest assured you are receiving the very best the mobile audio world has to offer. WET POWDER COATING (WPC)MB QUART pioneered the use of the Wet Powder Coating (WPC) process. Originally developed by the Atomic Research facility in Jlich, Germany, this deposition process applies a thin coating of metal to another surface. In our application of this technology, extremely fine and absolutely pure titanium powder is applied to our polypropylene cones. This results in an increase to the cones strength-to-weight-ratio as well as in the reduction of unwanted out-of-bandwidth harmonics and acoustical distortion. BALANCED TEMPERATURE TECHNOLOGY (BTT)Heat adversely affects the performance of electrical components. MB QUARTs Balanced Temperature TechnologyTM eliminates this condition through the application of unique heat dissipation techniques creating a constant and predictable temperature environment for all critical Q System components. BTT technology provides unrivaled sound quality and predictable, long-term performance. ALUMINUM TWEETER HOUSINGSOur Q-Line 25 mm aluminum tweeter housing represents a direct application of our BTT technology. Every Q tweeter is encapsulated within a specially designed aluminum cooling housing. Coupled to the tweeters motor assembly, the excess energy generated inside the tweeters magnet and voice coil assembly is dissipated into the surrounding environment, resulting in exceptional performance, improved power handling and high reliability. TITANIUM DOMETitanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Both our Q and Premium tweeter domes incorporate a composite surround material connecting the dome to the housing. This combination of dome materials reduces unwanted, out-of-bandwidth harmonics and acoustical distortion. The result is an extremely smooth frequency response and extended bandwidth for a truly musical listening experience. This is what gives MB QUART its signature sound. DIE-CAST ALUMINIUM BASKETSDesigned specifically for low-profile installations, these die-cast aluminum baskets are unique in that they can be installed in factory speaker locations. Lightweight but extremely rigid, the thin-wall casting technique provides structural integrity without undue stress on the mounting surface. The neodymium magnet is hydraulically pressed and permanent secured into the frame cavity. Generously sized integral cooling ribs for improved heat convection represent our original application of BTT technology. CONNECTION TERMINALSThe Q Line die-cast basket incorporates a gold-plated, multi-application input connection terminal system that provides a safe and secure electrical contact. Regardless of the wire conductor size, solder, screw-down or plug-in spade connections are possible.
|
Nothing livens up a soundstage like a quality set of tweeters. Already have a set of components up front? No problem. Try adding these to your A-Pillars for a truly eye-opening experience. These can also be used to blend your rear fill, and fit neatly into the rear doors of E46 and E39 sedans. You can't go wrong. They come with their own crossover network, so you don't have to worry about sending damaging frequencies to the tweeters.
MQ Quart's Reference 19 mm tweeter uses a metal tweeter housing. It is a direct application of their BTT technology originally applied to their Q-Line tweeters. This new design encapsulates the neodymium magnet structure in a specially designed metal cooling housing. This new mechanical structure helps to remove the excess energy generated inside the tweeters magnet and voice coil assembly. By dissipating the unwanted heat into the surrounding environment,their new Reference tweeter offers exceptional performance, improved power handling and high reliability. Theyve even reduced the dimensions oftheir new tweeter to allow it to be installed in even the smallest areas.
The new Reference coaxial tweeter support allows for rapid conversion of the component speaker elements into a coaxial system. This completely new support system offers adjustable positioning of the tweeter. By twisting the support, the tweeter can be set to three different angles, each 45 apart. This level of adjustment allows for the best acoustical reflection angle based upon your specific installation needs.
Using a combination of polyamide ABS composite reinforced with extremely short glass fibers, our Premium and Reference Line baskets withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is added through an insert molding process, resulting in precise orientation with the cone and voice coil. Because the basket is non-metallic, non-magnetic and resonance-free, it becomes one of the best possible designs for automotive loudspeaker application.
A light bulb is incorporated into the Premium and Reference crossover networks to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy (lighting the bulb) and allows continuous operation of the tweeter even at extreme volumes.
The solid one-piece connection terminals provide all possible connection options. Whether plug-connected, screw-connected or soldered, even with heavy-duty twin-core leads, the connections stay secure, effectively cutting out transfer resistance of even large-section cables.
Titanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Similar to the Q and Premium tweeters, our new smaller diameter 19 mm Reference tweeter domes incorporate a composite surround material connecting the dome to the housing. This combination of dome materials reduces unwanted, out-of-bandwidth harmonics and acoustical distortion. The result is an extremely smooth frequency response and extended bandwidth for a truly musical listening experience. This is what gives MB QUART its signature sound.
.75" tweeter kit with BTT and crossovers |
|
Impedance |
4 Ohms |
|
Frequency Response |
4.800 32.000 |
|
Sensitivity |
1,5dB |
|
Power Range |
50 100Watts |
|
Crossover Frequency |
4.800Hz |
Beautiful Low End Response, Unbelieveably Musical. . .Infinitely versatile, the Reference series subwoofers are at home in nearly any environment. Optimized for small sealed enclosures, these subwoofers are what allowed us to develop all of our BMW specific enclosures. At home in any of our system packages, the Reference subwoofers are frighteningly powerful, while maintaining an Extremely smooth response throughout the entire spectrum of low frequencies. 10" RWE-252/254 DVC subwoofer features at a Glance: |
|
Impedance |
2x2 / 2x4 Ohms |
|
Frequency Response |
22 300 |
|
Sensitivity |
2,4dB |
|
Power Range |
300Watts |
|
Crossover Frequency |
- |
|
Recommended Box 1 (Vb) |
0.65 cu. ft. sealed |
MQ Quart's Reference 19 mm tweeter uses a metal tweeter housing. It is a direct application oftheir BTT technology originally applied to their Q-Line tweeters. This new design encapsulates the neodymium magnet structure in a specially designed metal cooling housing. This new mechanical structure helps to remove the excess energy generated inside the tweeters magnet and voice coil assembly. By dissipating the unwanted heat into the surrounding environment,their new Reference tweeter offers exceptional performance, improved power handling and high reliability. Theyve even reduced the dimensions oftheir new tweeter to allow it to be installed in even the smallest areas.
The new Reference coaxial tweeter support allows for rapid conversion of the component speaker elements into a coaxial system. This completely new support system offers adjustable positioning of the tweeter. By twisting the support, the tweeter can be set to three different angles, each 45 apart. This level of adjustment allows for the best acoustical reflection angle based upon your specific installation needs.
Using a combination of polyamide ABS composite reinforced with extremely short glass fibers, our Premium and Reference Line baskets withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is added through an insert molding process, resulting in precise orientation with the cone and voice coil. Because the basket is non-metallic, non-magnetic and resonance-free, it becomes one of the best possible designs for automotive loudspeaker application.
A light bulb is incorporated into the Premium and Reference crossover networks to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy (lighting the bulb) and allows continuous operation of the tweeter even at extreme volumes.
The solid one-piece connection terminals provide all possible connection options. Whether plug-connected, screw-connected or soldered, even with heavy-duty twin-core leads, the connections stay secure, effectively cutting out transfer resistance of even large-section cables.
Titanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Similar to the Q and Premium tweeters, our new smaller diameter 19 mm Reference tweeter domes incorporate a composite surround material connecting the dome to the housing. This combination of dome materials reduces unwanted, out-of-bandwidth harmonics and acoustical distortion. The result is an extremely smooth frequency response and extended bandwidth for a truly musical listening experience. This is what gives MB QUART its signature sound.
4" 2-way component / coaxial system with .75" tweeter |
|
Impedance |
4 Ohms |
|
Frequency Response |
59 32.000 |
|
Sensitivity |
3,5dB |
|
Power Range |
3080Watts |
|
Crossover Frequency |
4.200Hz |
The first step in making your BMW sound better is by changing the speakers. More importantly, the front speakers. The MB Quart Reference Series are the perfect upgrade for the front soundstage of your BMW. Designed in Germany seemingly specifically for your BMW, these speakers drop directly in to your factory speaker locations, without any modifications to the vehicle, making them perfect for leased vehicles.
Only MB Quart combined with your BMW can give you this kind of musical nirvana. Never settling for less, Bavarian Soundwerks only recommends MB Quart speakers for your BMW.
Wait a second. We love theses speakers too, but they do require a couple of extra things.
First of all, to fully the realize the full potential of the MB Quart RCE 213's, you MUST use an external amplifier ( not factory amplifier ) to provide them with enough power to allow them to perform properly. They were NOT designed to be powered by a factory BMW amplifier, nor were they designed to be powered by an aftermarket source unit.
Second, MB Quart speakers, and any other speaker for that matter, need to be treated the same way that you treat your BMW. Keep your ears open. If you hear any distortion whatsoever, check your source unit to make sure none of the settings have been accidentally altered. Distortion equals blown speakers, which equals poor sounding music.
All it takes is your passion for music and your BMW.
MQ Quart's Reference 19 mm tweeter uses a metal tweeter housing. It is a direct application oftheir BTT technology originally applied to their Q-Line tweeters. This new design encapsulates the neodymium magnet structure in a specially designed metal cooling housing. This new mechanical structure helps to remove the excess energy generated inside the tweeters magnet and voice coil assembly. By dissipating the unwanted heat into the surrounding environment, their new Reference tweeter offers exceptional performance, improved power handling and high reliability. They've even reduced the dimensions oftheir new tweeter to allow it to be installed in even the smallest areas.
The new Reference coaxial tweeter support allows for rapid conversion of the component speaker elements into a coaxial system. This completely new support system offers adjustable positioning of the tweeter. By twisting the support, the tweeter can be set to three different angles, each 45 apart. This level of adjustment allows for the best acoustical reflection angle based upon your specific installation needs.
Using a combination of polyamide ABS composite reinforced with extremely short glass fibers, our Premium and Reference Line baskets withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is added through an insert molding process, resulting in precise orientation with the cone and voice coil. Because the basket is non-metallic, non-magnetic and resonance-free, it becomes one of the best possible designs for automotive loudspeaker application.
A light bulb is incorporated into the Premium and Reference crossover networks to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy (lighting the bulb) and allows continuous operation of the tweeter even at extreme volumes.
The solid one-piece connection terminals provide all possible connection options. Whether plug-connected, screw-connected or soldered, even with heavy-duty twin-core leads, the connections stay secure, effectively cutting out transfer resistance of even large-section cables.
Titanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Similar to the Q and Premium tweeters, our new smaller diameter 19 mm Reference tweeter domes incorporate a composite surround material connecting the dome to the housing. This combination of dome materials reduces unwanted, out-of-bandwidth harmonics and acoustical distortion. The result is an extremely smooth frequency response and extended bandwidth for a truly musical listening experience. This is what gives MB QUART its signature sound.
5.25" 2-way component / coaxial system with .75" tweeter |
|
Impedance |
4 Ohms |
|
Frequency Response |
52 32.000 |
|
Sensitivity |
2,6dB |
|
Power Range |
40 100Watts |
|
Crossover Frequency |
4.200Hz |
If you crave Midbass, and who doesn't, then these are the drivers for you. Drop in replacements, they will allow for sound quality like you have never known from the rear of your E36. The dual-configuration of these components allows you to either install the speaker as a coaxialstyle mount, or reposition the tweeter to a location that better suits yourmusical tastesto optimize your listening experience.
MQ Quart's Reference 19 mm tweeter uses a metal tweeter housing. It is a direct application of their BTT technology originally applied to their Q-Line tweeters. This new design encapsulates the neodymium magnet structure in a specially designed metal cooling housing. This new mechanical structure helps to remove the excess energy generated inside the tweeters magnet and voice coil assembly. By dissipating the unwanted heat into the surrounding environment,their new Reference tweeter offers exceptional performance, improved power handling and high reliability. Theyve even reduced the dimensions oftheir new tweeter to allow it to be installed in even the smallest areas.
The new Reference coaxial tweeter support allows for rapid conversion of the component speaker elements into a coaxial system. This completely new support system offers adjustable positioning of the tweeter. By twisting the support, the tweeter can be set to three different angles, each 45 apart. This level of adjustment allows for the best acoustical reflection angle based upon your specific installation needs.
Using a combination of polyamide ABS composite reinforced with extremely short glass fibers, our Premium and Reference Line baskets withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is added through an insert molding process, resulting in precise orientation with the cone and voice coil. Because the basket is non-metallic, non-magnetic and resonance-free, it becomes one of the best possible designs for automotive loudspeaker application.
A light bulb is incorporated into the Premium and Reference crossover networks to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy (lighting the bulb) and allows continuous operation of the tweeter even at extreme volumes.
The solid one-piece connection terminals provide all possible connection options. Whether plug-connected, screw-connected or soldered, even with heavy-duty twin-core leads, the connections stay secure, effectively cutting out transfer resistance of even large-section cables.
Titanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Similar to the Q and Premium tweeters, our new smaller diameter 19 mm Reference tweeter domes incorporate a composite surround material connecting the dome to the housing. This combination of dome materials reduces unwanted, out-of-bandwidth harmonics and acoustical distortion. The result is an extremely smooth frequency response and extended bandwidth for a truly musical listening experience. This is what gives MB QUART its signature sound.
6"x9" 2-way component / coaxial system with .75" tweeter |
|
Impedance |
4 Ohms |
|
Frequency Response |
32 32.000 |
|
Sensitivity |
2,5dB |
|
Power Range |
80 150Watts |
|
Crossover Frequency |
3.900Hz |
MQ Quart's Reference 19 mm tweeter uses a metal tweeter housing. It is a direct application of their BTT technology originally applied to their Q-Line tweeters. This new design encapsulates the neodymium magnet structure in a specially designed metal cooling housing. This new mechanical structure helps to remove the excess energy generated inside the tweeters magnet and voice coil assembly. By dissipating the unwanted heat into the surrounding environment,their new Reference tweeter offers exceptional performance, improved power handling and high reliability. Theyve even reduced the dimensions oftheir new tweeter to allow it to be installed in even the smallest areas.
The new Reference coaxial tweeter support allows for rapid conversion of the component speaker elements into a coaxial system. This completely new support system offers adjustable positioning of the tweeter. By twisting the support, the tweeter can be set to three different angles, each 45 apart. This level of adjustment allows for the best acoustical reflection angle based upon your specific installation needs.
Using a combination of polyamide ABS composite reinforced with extremely short glass fibers, our Premium and Reference Line baskets withstand temperature and humidity extremes with little, if any, reaction. The magnetic motor assembly is added through an insert molding process, resulting in precise orientation with the cone and voice coil. Because the basket is non-metallic, non-magnetic and resonance-free, it becomes one of the best possible designs for automotive loudspeaker application.
A light bulb is incorporated into the Premium and Reference crossover networks to extend the life of the tweeter by protecting it against overloading. This element automatically absorbs excess energy (lighting the bulb) and allows continuous operation of the tweeter even at extreme volumes.
The solid one-piece connection terminals provide all possible connection options. Whether plug-connected, screw-connected or soldered, even with heavy-duty twin-core leads, the connections stay secure, effectively cutting out transfer resistance of even large-section cables.
Titanium was initially developed for the aerospace industry because of its superior strength-to-weight-ratio. It is at the same time both very light and very strong. As a material for tweeter dome application, titanium is ideal only if properly engineered. MB QUART has nearly perfected the use of titanium over the past 25 years. Similar to the Q and Premium tweeters, our new smaller diameter 19 mm Reference tweeter domes incorporate a composite surround material connecting the dome to the housing. This combination of dome materials reduces unwanted, out-of-bandwidth harmonics and acoustical distortion. The result is an extremely smooth frequency response and extended bandwidth for a truly musical listening experience. This is what gives MB QUART its signature sound.
6.5" 2-way component / coaxial system with .75" tweeter |
|
Impedance |
4 Ohms |
|
Frequency Response |
38 32.000 |
|
Sensitivity |
2,5dB |
|
Power Range |
60 130Watts |
|
Crossover Frequency |
4.200Hz |
These Reference Series 8" subwoofers can fit into enclosures that take up virtually no trunk or hatch space at all. Perfect solution for X5's, 318ti's, or any other hatchback style BMW chassis. We are currently developing enclosures for these subwoofers.
RWE 202/204 Dual Voice Coil Subwoofer features at a Glance: |
|
Impedance |
2x2 / 2x4 Ohms |
|
Frequency Response |
28 300 |
|
Sensitivity |
2,8dB |
|
Power Range |
150 Watts |
|
Crossover Frequency |
- |
|
Recommended Box 1 (Vb) |
0.50 cu. ft. sealed |
With the purchase of an MBQuart amplifier and Bavarian Soundwerks wiring kit, Bavarian Soundwerks will ensure that all the extra work has already been done for you. Our wiring kits come with fuse holders and terminalsalready installed for you. We'll even install the MBQuart wire terminals used for effortless connection from yourpower source and audio signal to your new amp. We have taken every measure to ensure that you or your professional installer is left with only the bare minimum labor required to integrate our system into your BMW.
Genuine MB QUART fans have long been waiting for this, and now they are here: the first MB QUART amplifiers are being launched onto the market, rounding off the MB QUART Car Audio System into the complete sound experience.
These new units are perfectly matched to the MB QUART loudspeaker systems, and are equipped with a range of special features that make them the best in their class. For example, the assemblies are arranged one above the other, and their power supply is insulated from the end stage. The analog operating elements are installed at the top, and combined with a digital display. All connections are located on the left side of the amplifier. And finally, a unique bypass mode ensures maximum amplifier performance and high loading. In combination with MB QUART loudspeakers, the result is an unbelievably different and truly amazing sound experience: simply perfection.
A proprietary circuit that simplifies the signal path of the amplifier, allowing the signal to travel through the amplifier at a low voltage. The result: Greater reliability, cleaner performance and exceptional musicality with the speed, durability and power of MOSFETs. (U.S. Patent 4,467,288)
MEHSA is a proprietary process that yields up to 5 times better heat transfer than traditional FET mounting techniques using the exact same components. A multiplayer insulated metal substrate operating with minimal thermal resistance spreads heat both downward & outward to quickly dissipate heat from each device across the heat sink.
MB Quart uses MOSFET devices in both the power supply and output stages of amplifiers. This means better: thermal stability, switching speed, ultra low output impedance and wider bandwidth linearity. MOSFETs operate very similarly to vacuum tubes in that they are more linear than bi-polar transistors. However, MOSFETs can deliver the midrange clarity without the limitations of transient response and high frequency phase shifting normally associated with tube operation. Bottom line,MBQuart uses the best components so you will too!
Mono Amplifier |
ALL MB QUART amplifiers are designed, developed, manufactured and tested in accordance with the CEA-2006 Amplifier Power Standard. CEA-2006 specification. |
|
Power Output |
1000 Watts RMS x 1 channel at 1-Ohm and < 1.0% THD+N |
|
Signal-to-Noise |
>85 dBA (1 Watt @ 4-Ohms) |
|
Frequency Response |
10Hz - 250Hz +/- 0.5dB |
|
Bridgeable |
Yes |
|
Input Signal |
150mV - 8V RMS |
|
Tone Controls |
Remote Bass EQ |
|
Signal Input |
RCA |
|
Signal Output |
RCA Pass-Thru |
|
Crossover |
50Hz - 250Hz |
|
Subsonic Filter |
15Hz - 50Hz |
|
Phase Control |
0-180 degrees |
|
Indicators |
Output Clipping |
|
Remote Controls |
Remote Bass EQ |
|
Dimensions |
28 cm x 40 cm x 5,8 cm |
|
Weight |
TBA |
|
Dissipation Technology |
Extruded Aluminum Heatsinks |
|
Feature Notes |
Top mount controls, defeatable 'front end' |
We have used this amplifier in nearly every application possible, and it has completely shattered our expectations. Need to run two Discus Subwoofers? No problem, as it effortlessly drives them to their maximum capabilities. What about powering your Q-Line components? The dynamic output of this amplifier is pure enough to bring even the most minute details to light as you listen in awe. Truly the most versatile amplifier we have ever tested.
With the purchase of an MBQuart amplifier and Bavarian Soundwerks wiring kit, Bavarian Soundwerks will ensure that all the extra work has already been done for you. Our wiring kits come with fuse holders and terminalsalready installed for you. We'll even install the MBQuart wire terminals used for effortless connection from yourpower source and audio signal to your new amp. We have taken every measure to ensure that you or your professional installer is left with only the bare minimum labor required to integrate our system into your BMW.
Genuine MB QUART fans have long been waiting for this, and now they are here: the first MB QUART amplifiers are being launched onto the market, rounding off the MB QUART Car Audio System into the complete sound experience.
These new units are perfectly matched to the MB QUART loudspeaker systems, and are equipped with a range of special features that make them the best in their class. For example, the assemblies are arranged one above the other, and their power supply is insulated from the end stage. The analog operating elements are installed at the top, and combined with a digital display. All connections are located on the left side of the amplifier. And finally, a unique bypass mode ensures maximum amplifier performance and high loading. In combination with MB QUART loudspeakers, the result is an unbelievably different and truly amazing sound experience: simply perfection.
A proprietary circuit that simplifies the signal path of the amplifier, allowing the signal to travel through the amplifier at a low voltage. The result: Greater reliability, cleaner performance and exceptional musicality with the speed, durability and power of MOSFETs. (U.S. Patent 4,467,288)
MEHSA is a proprietary process that yields up to 5 times better heat transfer than traditional FET mounting techniques using the exact same components. A multiplayer insulated metal substrate operating with minimal thermal resistance spreads heat both downward & outward to quickly dissipate heat from each device across the heat sink.
MB Quart uses MOSFET devices in both the power supply and output stages of amplifiers. This means better: thermal stability, switching speed, ultra low output impedance and wider bandwidth linearity. MOSFETs operate very similarly to vacuum tubes in that they are more linear than bi-polar transistors. However, MOSFETs can deliver the midrange clarity without the limitations of transient response and high frequency phase shifting normally associated with tube operation. Bottom line, MBQuart uses the best components so you will too!
Stereo Amplifier |
ALL MB QUART amplifiers are designed, developed, manufactured and tested in accordance with the CEA-2006 Amplifier Power Standard. CEA-2006 specification. |
|
Power Output |
400 Watts RMS x 2 channels at 2-Ohms and < 0.5% THD+N |
|
Signal-to-Noise |
>95 dBA (1 Watt @ 4-Ohms) |
|
Frequency Response |
10Hz - 40kHz +/- 0.5dB |
|
Bridgeable |
Yes |
|
Input Signal |
150mV - 8V RMS |
|
Tone Controls |
No |
|
Signal Input |
RCA |
|
Signal Output |
RCA Pass-Thru |
|
Crossover |
50Hz - 500Hz / 500Hz - 5kHz |
|
Subsonic Filter |
No |
|
Phase Control |
No |
|
Indicators |
Output Clipping (L & R) |
|
Remote Controls |
No |
|
Dimensions |
28 cm x 40 cm x 5,8 cm |
|
Weight |
TBA |
|
Dissipation Technology |
Extruded Aluminum Heatsinks |
|
Feature Notes |
Top mount controls, defeatable 'front end' |
These 3 meter MicroXLN are perfect for integrating your new amplifiers into your BMW. This is the cable we use for integrating subwoofer amplifiiers into existing OEM systems. Perfect length, perfect cable, and most importantly, perfect sound.
Monster's revolutionary MicroXLN design packs high performance into the world's smallest, noise-free cable
The ultra-compact MicroXLN boasts more advanced technology than you'd get with a cable twice its size, includingMonster's award-winning XLN construction.
Monter's proprietary multiple gauge wire networks maximize all the bass that's hiding in the sub-channels, while their unique helical windings minimize the loop area for maximum magnetic noise rejection. In fact, noise sensitivity is reduced by over 60dB compared to ordinary side-by-side coaxial interconnects.
Whatever your installation needs are MicroXLN is the perfect cable when space is tight
DoubleHelix (2-channel), QuadHelix (4-channel) andMonster's exclusive QuadHelix (6-channel) and Balanced designs fit virtually anywhere. In fact, Monster's Balanced Micro XLN cable is the first mini high performance cable upon this emerging industry standard.
Miniature Stubby Turbine Design connector does more with less
Monster's PhonoLink Stubby connector is the smallest high performance car audio RCA connector. Their patented Turbine straight-cut design improves contact surface area for an air-tight fit. Its mini size offers several installation advantages, including the ability to drill smaller holes and group densely packed interconnects easily so your car's aesthetic appeal remains intact. 24k gold contacts provide maximum signal transfer.
Let the good times roll with ultra-quiet, ulta-compact Monster MicroXLN car audio cables
You can have it all: a no-noise system that sounds as good as it looks. All you need is Monster's high performance MicroXLN Xtra Low Noise interconnect cables and, of course, the right tunes.
These 5 meter, 2 channel Monster Cable MicroXLN RCA cables are ideal for transferring your music from your aftermarket source unit to your trunk mounted amplifiers. These particular cables are perfect for adding a subwoofer amplifier, or atwo channel amplifier to run either a pair of front speakers or rear speakers. Flexible, and very easy to run throughout the tight tolerances in your BMW, these cables are optimal for just about every application out there.
Monster's revolutionary MicroXLN design packs high performance into the world's smallest, noise-free cable
The ultra-compact MicroXLN boasts more advanced technology than you'd get with a cable twice its size, including Monster's award-winning XLN construction.
Monter's proprietary multiple gauge wire networks maximize all the bass that's hiding in the sub-channels, while their unique helical windings minimize the loop area for maximum magnetic noise rejection. In fact, noise sensitivity is reduced by over 60dB compared to ordinary side-by-side coaxial interconnects.
Whatever your installation needs are MicroXLN is the perfect cable when space is tight
DoubleHelix (2-channel), QuadHelix (4-channel) and Monster's exclusive QuadHelix (6-channel) and Balanced designs fit virtually anywhere. In fact, Monster's Balanced Micro XLN cable is the first mini high performance cable upon this emerging industry standard.
Miniature Stubby Turbine Design connector does more with less
Monster's PhonoLink Stubby connector is the smallest high performance car audio RCA connector. Their patented Turbine straight-cut design improves contact surface area for an air-tight fit. Its mini size offers several installation advantages, including the ability to drill smaller holes and group densely packed interconnects easily so your car's aesthetic appeal remains intact. 24k gold contacts provide maximum signal transfer.
Let the good times roll with ultra-quiet, ulta-compact Monster MicroXLN car audio cables
You can have it all: a no-noise system that sounds as good as it looks. All you need is Monster's high performance MicroXLN Xtra Low Noise interconnect cables and, of course, the right tunes.
Ultra high performance Interlink 401XLN solves the problem of car audio noise and provides outsanding music reproduction. Monster's exclusive XLN Xtra Low Noise QuadHelix interconnect cables feature special twisted construction for greater noise rejection and superior performance. Installing your system with Monster's XLN cables ensures maximum performance--virtually noise free.
 |
Connector housing is 1/3 the overall length of average RCA connectors for easy installation in tight places. |
|
Features QuadHelix construction for extra low noise music reproduction. |
|
Time Correct windings for accurate reproduction of music. |
|
Superior Connection 8-cut Turbine 24k gold RCA connectors resist corrosion and will not vibrate loose over time. |
|
XLN construction for rejection of loop area noise and inductive interference. |
Monster Cable XLN Pro RCA Cables feature advanced technologies to maximize component performance. These 4-channel cables are competition grade, audiophile-quality cables--delivering the ultimate tonal balance and audio accuracy so you'll hear music with greater clarity and dynamic range. Unleash your system's full performance potential with XLN PRO .
All ofBavarian Soundwerks'project vehicles are wired with XLN Pro cables, because we only want the absolute best sound possible for our cars and yours. We recommend these cables to anyone who demands the utmost performance from their audio systems, and are not willing to compromise any aspect of their sound.
 | |
|
Dual "balanced" conductors design delivers more natural music reproduction. |
|
MultiTwist construction minimizes intertransient noise for more detailed music reproduction. |
|
Award-winning 24k gold contact Turbine RCA connectors provide high conductivity for the best possible signal transfer. |
|
120 dB of noise rejection for lowest noise floor. |
|
Split-Tip Center Pin for greater contact pressure and lower distortion and maximum signal transfer |
